Datalogic Formula F7400 User Manual page 45

Table of Contents

Advertisement

USE AND FUNCTIONING ________________________________________________________
When the F7400 terminal is restarted, the keyboard is in ALPHA mode but you can
change the keyboard mode by using the SPECIAL KEYS.
Ed.: 06/00
SPECIAL KEYS: [ALPHA], [FUNC], [SHIFT] to change the
keyboard mode;
ALPHA MODE
Switches keyboard from the alphabetical ALPHA mode to the
number and symbol NORMAL mode.
The keyboard remains in this mode till the ALPHA key is
pressed again.
FUNC MODE
Switches keyboard to the function FUNC mode from the
ALPHA or NORMAL mode.
The keyboard remains in this mode only when the next general
key is pressed, then it returns to the previous mode.
For example, to press the [F1] key, press the [FUNC]-[A] in
sequence.
SHIFT MODE
On the F7400, the [SHIFT] key is not pressed at the same time
with other keys, and this function is to switch the keyboard
into the SHIFT symbols mode from the ALPHA or NORMAL
modes.
The keyboard remains in this new mode only when the next
general key is pressed, then it returns to the previous mode.
For example, to press the [&] key, press the [SHIFT]-[A] in
sequence.
Do not confuse this key with the [SHIFT] key
on a PC keyboard which is used to switch
between upper and lower case characters.
6
41

Advertisement

Table of Contents
loading

Table of Contents