EverFocus Paragon 264 Series Instruction Manual page 76

2. Change the section to different mode (with different color) by clicking on the first block of each section.
The color swatches from gray -> orange -> blue, every time user clicks the first block of a section.
Schedule Setting from front panel
1. Enter schedule setting mode: press Enter button to enter schedule setting mode. At this time, the
whole editing area at right-down side will be highlighted within a blue frame. See below image.
2. Enter camera selection mode: turn Jog knob to switch to Camera selection mode. When Camera
selection mode is selected, all 16 cameras will be highlighted in a blue frame. See below image.
3. Selecting camera: Turn Shuttle knob to select desired camera to configure. Selected camera number
will be highlighted by a blue frame. See above image.
4. Enter time bar editing mode: turn Jog knob to switch to time bar editing mode. When this mode is
selected, all 9 time bars will be highlighted within a blue frame.
5. Select desired time bar for setting: press Enter button, the first time bar will be selected for setting
and highlighted in a red frame. See below image. Press Jog to switch to desired time bar for setting.
69