EverFocus Paragon 264 Series Instruction Manual page 77

6. Editing blocks in a time bar: when a time bar is selected (highlighted in red frame), press Enter
button, then the first block of this bar will be selected (highlighted in blue frame). Turning Jog knob to
switch to desired block as starting time, and press Enter button again to confirm. At this time, the
current and all following blocks will turn into gray, which means this gray timezone has been set to the
recording mode of gray(No Rec). User can also change the timezone to a different record mode (with
different color) by following instruction in next step.
7. Changing recording mode (color) of a timezone: Turn Jog knob to switch to the first block (with
number on it) of a timezone. Clicking Enter button and this timezone will switch to another color, which
means switching to another record mode. The color switch sequence is gray->orange->blue.
70