Audio Installation - EverFocus Paragon 264 Series Instruction Manual

Table of Contents

Advertisement

2.2 AUDIO INSTALLATION

The DVRs provide 16/8 audio inputs and 1 audio output.
The inputs are designed for max. 1
@ 20 KOhm input.
V
pp
The installation has to be effected with audio coax cable and RCA plugs.
The output provides a max. 1
@ 20 KOhm output line audio signal and may be connected to e.g. a
V
pp
monitor's audio input. The direct connection of (passive) speakers is not supported.
ATTENTION: The direct connection of a non-amplified microphone is not supported (a microphone
amplifier is required).
AUDIO RECORDING FUNCTIONALITY:
Audio recording is activated / deactivated in the RECORD menu (chapter 5.4.1) for all channels.
Audio of all channels is always recorded together with (each) video and is independent of the image
recording rate.
During playback/live, use the JOG to select camera and press ENTER to turn audio ON or OFF.
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Paragon 264x4 seriesParagon 264x2 series

Table of Contents