Preparing The Computer For Disassembly; Removing The Main Battery - Compaq ARMADA 6500 SM Service Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.4 Preparing the Computer for Disassembly

To prepare the computer for disassembly:
1. Power off the computer and disconnect external power.
2. Remove the main battery (Figures 4-2 and 4-3).
3. Remove any devices installed in the MultiBay (Figures 4-4 and 4-5).

Removing the Main Battery

To remove the main battery:
1. Turn off the computer and disconnect external power.
2. Turn the computer over so the bottom of the unit is facing up.
3. While depressing the battery near the latch
position
Figure 4-2. Releasing Main Battery
(Figure 4-2).
, slide the battery latch to the unlock
FRU Replacement 4-7