Preparing The Computer For Disassembly - Compaq Presario V6000 Maintenance And Service Manual

Removal and Replacement Procedures
Disassembly Sequence Chart (Continued)
Section Description
5.12 Power Button Board
5.13 Display Assembly
Display bezel
Display inverter
Display panel
Display hinges
Wireless antenna transceivers
Microphones
5.14 Top Cover
5.15 Audio Board
5.16 Bluetooth Module
5.17 ExpressCard Assembly
5.18 USB/Power Connector Board
5.19 System Board
5.20 Fan/Heat Sink Assembly
5.21 Processor
5.3 Preparing the Computer For
Disassembly
Before you begin any removal or installation procedures:
1. Shut down the computer. If you are unsure whether the
computer is off or in hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
5-4
# of Screws Removed
1
4
8
0
4
4
2
2
22
2
2
4
2
2
4
1 loosened
Maintenance and Service Guide