. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2
System BIOS
This chapter provides information on how to configure the computer and its security
features using the System Setup Program. The computer is configured with default
settings selected for typical use.
If you are familiar with System Setup programs, refer to the appropriate sections in this
chapter for information on configuring or updating the computer. Otherwise, carefully
read this chapter before attempting to modify the computer's configuration and security
settings.
Here are some instances when you might want to change the computer's System Setup.
You might need to:
•
Change the date and time
•
Change the computer's security level
•
Enable/disable and configure power management
•
Enable the infrared port or other devices
•
Enable boot device options
2.1 Running System Setup
The System Setup Program enables you to select and store information about the
computer's hardware configuration, boot sequence, security, and power management
features. This information is stored in the computer's battery backed-up CMOS RAM.
System Setup Utility
To run System Setup:
1. Turn on or reboot the computer.
2. During system boot, press Fn + F3 when the Compaq logo appears. When the logo
appears you have approximately 4 seconds to enter System Setup.
System BIOS
2-1