Table of Contents
Advertisement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Menu
(continued)
Feature
Resume On Time
Resume Time
Resume Date
*Factory default setting
2.7 Boot Menu
Enter the Boot Menu to change the order in which devices will be searched for an
operating system.
Feature
Summary Screen
QuickBoot Mode
Boot Device Priority Submenu
*Factory default setting
2-12
System BIOS
Settings
Comments
Off*
When this option is set to On and Suspend Mode is set to
Suspend to RAM, the system wakes up at the time defined
On
in Resume Time. Resume on Time will not work when
the Suspend Mode is set to Save to Disk.
Enter resume time: hour,
This option sets the time that the system will wake up from
minute, second format.
Suspend. Resume On Time must be set to On in order for
the system to wake at the defined time.
Enter resume date: month,
This option sets the date that the system will wake up from
day, year format.
Suspend. Resume On Time must be set to On in order for
the system to wake on the defined date.
Settings
Comments
Disabled*
This option allows you to view a system configuration
Enabled
screen during bootup.
Disabled
When set to Enabled, this option reduces the time required
Enabled*
to complete POST by allowing the system to test only the
major system components.
This option allows you to define the drive boot sequence. To
change the order, move the highlighted cell to the field to
be moved. Press F5 to move the field to a lower priority.
Press F6 to move the field to a higher priority.
Default priority:
1. [diskette drive]
2. [removable devices]
3. [hard drive]
4. [ATAPI CD-ROM drive] (or DVD-ROM drive)
Advertisement
Table of Contents
