Running Compaq Diagnostics; Boot Sequencing; Factory Default Settings - Compaq Armada 1500C series Service Manual

2.5.4 Running Compaq Diagnostics

Compaq Diagnostics provides computer component information when the operating
system is working.
If you are running Windows 95 or later, access Compaq Diagnostics for Windows by
double-clicking My Computer ⇒ Control Panel ⇒ Compaq Diagnostics.

2.5.5 Boot Sequencing

Run Computer Setup.
1.
Click the System Features icon ⇒ Boot Management box ⇒ MultiBoot tab.
2.
Designate the hard drive boot (startup) sequence you want.
3.
Click OK to accept the changes.
4.

2.5.6 Factory Default Settings

Enable POST Memory Test
Keyboard NumLk
1
2
Boot display
Language
Serial ports
Serial port
Unassigned
Parallel port
Ethernet port
2-16 Troubleshooting
Table 2-15
Factory Default Settings
Initialization
Checked (enabled)
Unchecked (Off)
Hard drive in the computer
Hard drive in the computer MultiBay
Auto
Language of country
Ports
3F8, IRQ4
2F8, IRQ3
378, IRQ7
300, IRQ9
Continued