Special Considerations When Using Timers
•
For Locked Programs—You must enter the receiver password before you can create
an automatic timer. You can create a manual timer for a locked program without
entering the password. However if you do this, when the timer starts, the receiver may
display only an error or password-entry menu screen.
•
For Pay-Per-View Programs—You must order a Pay-Per-View program or event
when you create an event timer for it.
•
For Blacked Out Programs—If you set a timer for a program or event that is blacked
out in your area, then when the timer occurs, the receiver may only display an error.
U
T
SING THE
IMERS
1
Press MENU on the remote and select Daily Schedule.
2
Select Timers for the Timer List screen.
3
You can manage the timers from the Timer List screen. Select from the Sort, Set Priority,
Edit List, Manual Timer, or DISH Pass options. Select Done when finished.
U
D
SING THE
AILY
With the Daily Schedule use the ARROWS to select a future program and Skip or Restore
an event timer. You can also choose to Protect it, or view the start early/end late settings.
•
To change the start early/end late setting, select the event within the Timers List.
•
If the program is included in a DishPASS timer, you cannot change the start early or
end late times on an individual occurrence; it must be changed within the DishPASS
timer, selected from the full event Timers List.
•
Press PAGE UP to see the previous days' timers. Review these timers if you want to
see timer results (for example, if a timer recorded successfully or why it might have
been skipped).
L
IST
S
CHEDULE
Record Future Programs
Using the Timers List
3
3
67