Satellite Receiver Overview - Dish Network Dish ViP722K User Manual

Chapter 2

Satellite Receiver Overview

S
ATELLITE
This section gives you an overview of your DISH satellite TV receiver system.
Satellite Receiver
This dual-tuner satellite receiver with integrated digital video recorder can view/record
high-definition (HD) and standard-definition (SD) DISH programming on two TVs, or view/
record over-the-air digital/HD broadcasts on the nearby HDTV.
• Nearby TV (TV1)—Connect to an HDTV to view SD and HD DISH programming and
over-the-air digital/HD broadcasts. Programming from the receiver is delivered to the
nearby TV using one or more audio/video interconnect cables.
• Remote TV(s) (TV2)—Connect to an SDTV to view SD and down-converted HD
broadcasts. Programming from the receiver is usually delivered to the remote TV(s)
using existing in-home coaxial cable connections.
Remote Controls
Two remote controls come with your receiver:
• Remote Control 1—An Infrared (IR) remote to control programming for the nearby TV
(TV1). This remote control is labeled with a green number 1, which matches similar
markings on the receiver output connections and the menus for the nearby TV.
• Remote Control 2—An Ultra-High Frequency Pro (UHF Pro) remote to control
programming for a remote TV (TV2). This remote control is labeled with a blue
number 2, which matches similar markings on the receiver output connections and the
menus for the remote TV. Be sure to set up the remote control to operate the receiver
(see page 75).
12
R O
ECEIVER VERVIEW