Setting Up To Display In Hd - Dish Network Dish ViP722K User Manual

Chapter 12
Connecting to the Nearby TV (TV1)

Setting Up to Display in HD

Once the receiver has been activated with qualifying DISH programming, you will be able
to receive high-definition programs to watch. Use the following steps to select the desired
HDTV format to display these programs on your TV.
1
Consult
HDTV
User's Guide
1
Consult your HDTV user's guide for the best HD-format resolution that the TV supports
(typically, either 1080i or 720p).
Note: If you choose to view a DISH-on-Demand event in 1080p, the receiver performs a
brief video test to determine your HDTV's compatibility with that higher resolution.
2
Press the MENU button, select System Setup, and then HDTV Setup.
3
Select the HD format settings (Analog Type and TV Type) that matches the format your
TV supports.
4
While in this menu, select the Aspect Ratio option that matches your TV:
• 16x9 is the setting for a wide-screen HDTV display.
• 4x3 #1 is the setting to use on a 4x3 TV which uses vertical compression. When
viewing a 16x9 program using this setting, a compatible TV automatically makes the
picture in letterbox format (with black bars across the top and bottom of the screen), to
preserve the correct horizontal and vertical proportions of the wide-screen HD image.
• 4x3 #2 is the setting to use on a standard 4x3 TV which does not use internal vertical
compression. When viewing a 16x9 program on such a TV, black bars at the top and
bottom will not be displayed, and a high-definition image will appear tall and skinny.
5
Select Done. If required, set up the HDTV to display in the best format. If you are
connected using an HDMI cable, some HDTVs will automatically adjust the resolution
setting to the receiver.
114
2
MENU
System Setup 6
HDTV Setup
8
Press MENU,
select System Setup
then HDTV Setup
3
4
Analog og
TV
Type ype e
Type
Aspect
Ratio
Offair Offa ir
1080i
16x9
Select S S S Select t t Select S l t t
Select
Analog and
Aspect Ratio
TV Type
5
Done
Select Done