External Standard Flue Kit - Quadra-Fire SANTA FE Owner's Manual

R
51
D.
150mm
(minimum)
Heat-resistant
oor protector
December 2006
Page 30

External Standard Flue Kit

600mm from
roof penetration
50mm
(minimum)
Seismic restraint
(to be tted)
To order : Telephone 0800 765 431. Fax 64 3 341 8057
7068-114B
This ue kit may be used in new and replacement
applications with the ue penetrating the wall behind
the re, running vertically up an outside wall and
penetrating the so t. The overall height of the f lue is
3.6m. All visible ue has a galvanised nish, and can be
powdercoated on request. Kit is supplied in a carton.
Each 51 External Standard Flue Kit contains:-
a P t r N o D e r c s p i i t n o
1 Galvanised outer liner
ø100mm x 900mm long
2 Stainless steel inner liner
ø75mm x 900mm long
5 Inner/outer ue liner spacer
6w Wall thimble – 2 pieces
ø102mm holes
6s So t thimble ø107mm hole
7w Wall decor plate
ø102mm hole – white
8 Rain cap 75mm
9 Rain Cap 100mm
26 Lined T-adaptor
Note: The Davin 51 External Standard Flue
Kit complies with AS/NZS 2918:2001 as per
Note: The Davin 51 External Standard Flue
Applied Research Test Report 05/1185, dated
Kit complies with AS/NZS 2918:2001 as per
15 September 2005.
Applied Research Test Report 05/1185, dated
15 September 2005.
All res must be installed by a quali ed
installer as per the manufacturer's
Drawing representative only - not to scale.
as per the manufacturer's instructions and AS/
instructions and AS/NZS2918:2001.
NZS2918:2001.
info@switchenergy.co.nz www.switchenergy.co.nz
Santa Fe NZ Pellet Stove
Q a u t n y t i
4
4
2
1
1
1
1
1
1
December 1, 2011