Internal Standard Flue Kit - Quadra-Fire SANTA FE Owner's Manual

Santa Fe NZ Pellet Stove
C.
50
150mm
(minimum)
Heat-resistant
oor protector
December 2006
December 1, 2011

Internal Standard Flue Kit

600mm from
roof
penetration
Seismic restraint
(to be tted)
172mm
(minimum)
To order : Telephone 0800 765 431. Fax 64 3 341 8057
This ue kit may be used in new and replacement
applications in rooms with stud height of 2.4m. The
overall height of the ue is 3.6m. The visible u e is
nished in black and the ceiling plate is white. T he
support angles for securing the liner to the ceilin g are
not shown. Kit is supplied in a carton.
Each 50 Internal Standard Flue Kit contains:-
a P t r N o D s e i r c t p o i
1 Galvanised outer liner
ø100mm x 900mm long
2 Stainless steel inner liner
ø75mm x 900mm long
4a Black p/coat outer liner
ø100mm x 900mm long
5 Inner/outer ue liner spacer
6c Ceiling thimble ø107mm hole
7c Ceiling decor plate
ø107mm hole – white
8 Rain cap 75mm
9 Rain Cap 100mm
10b Elbow 45° – ø75mm stainless
– black (painted)
12H T-adaptor/cleanout – ø75mm
– black (painted)
23 Support angle 950mm long
– 50mm x 50mm sides
25mm minimum clearance if lined ue
Note: The Davin 50 Internal Standard Flue
Kit complies with AS/NZS 2918:2001 as per
Applied Research Test Report 05/1185, dated
15 September 2005.
All res must be installed by a quali ed
installer as per the manufacturer's
instructions and AS/NZS2918:2001.
7068-114B
n Q a u t n
1
4
3
2
1
1
1
1
1
1
2
Drawing representative only - not to scale.
info@switchenergy.co.nz www.switchenergy.co.nz
R
y t i
Page 29