Chapter 8 - Communication; Connecting The Dolphin 6100-Usb Communication Cable; Charging Terminal With Usb Cable - Honeywell Dolphin 6100 User Manual

8
Communication

Connecting the Dolphin 6100-USB Communication Cable

To facilitate USB communication between the Dolphin terminal and the host workstation, you may
connect your unit to a host by using either the optional Dolphin 6100-USB Communication Cable or
HomeBase. If you use the Communication Cable, slide the cable unit onto the bottom of the terminal
lining up the terminal's I/O connector with the cable unit's connector.
USB Cable

Charging Terminal with USB Cable

Not only can you communicate between the terminal and the host using the Dolphin Charging/
Communication cable, but you can also trickle charge the terminal. The preferred charging method,
however, is using the supplied power cord and plugging the unit into the wall. To charge the main battery
using the USB cable:
1. Disconnect the cable and select
Power Cable
> Settings > System > Power. The default setting is Off.
Host
Workstation
USB Connector
8 - 1