Expansion Cards - HP ProDesk 405 G2 Microtower Maintenance And Service Manual

Expansion cards

Nvidia NVS310 PCIe x16 graphics card, 512 MB
Nvidia NVS315 PCIe x16 graphics card, 1 GB
AMD Radeon HD8490 DP PCIe x16 graphics card, 1 GB
AMD Radeon HD8470 PCIe x16 graphics card, 2 GB (for use only in the People's Republic of China)
AMD Radeon HD8350 DH PCIe x16 graphics card, 1 GB
Nvidia GeForce GT630 DP PCIe x16 graphics card, 2 GB
Intel PRO/1000 single port GbE NIC, includes bracket
Serial port, PCI card
Printer port, PCI card
The computer has three PCI Express x1 expansion slots and one PCI Express x16 expansion slot that is
downshifted to a x4 slot.
NOTE: You can install a PCI Express x1, x8, or x16 expansion card in the PCI Express x16 slot.
For dual graphics card configurations, the first (primary) card must be installed in the PCI Express x16 slot.
To remove, replace, or add an expansion card:
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the screw that holds down the expansion card retention latch (1) then slide the latch up (2) and
pull it off the rear of the chassis (3).
4. Locate the correct vacant expansion socket on the system board and the corresponding expansion slot
on the back of the computer chassis.
(Preparation for disassembly on page
(Access panel on page 24)
23).
Expansion cards 29