About Your Hub - BT Business Hub 3 Getting Started And Troubleshooting

Your network login details
If you want to set up your Hub without using the CD, or you've had to reset your Hub,
you'll need to make sure that your unique network login username and password (sent
to you in your 'welcome' emails and letters) are entered in your Hub Manager.
Open your Hub Manager and click the Broadband User Name
sure this matches the details sent to you in your 'welcome' emails and letters. If it doesn't,
click Disconnect, enter the username and password sent to you and click Connect.
Note: if you're using using a corporate VPN, you'll need to disconnect first.
Then go to your Hub Manager at http://btbusinesshub.home and follow the
on-screen instructions.
Hub sockets summary
Broadband: ADSL
socket (grey)
Broadband: BT Infinity
socket (red)
Ethernet sockets
(yellow) 1-4
USB socket
Power socket
connects your Hub to your broadband line via an ADSL filter
only for BT Infinity for business and fibre optic products
connects computers, servers or other devices using a wired connection
(no. 4 is a GigE port, which is used for high-speed devices or servers)
for connecting USB 2.0 memory devices or external hard drives
connects your Hub to mains power using the Hub's power cable
Configure button. Make

About your Hub

17