Usb Record Level - DigiTech RP360 Owner's Manual

USB Record Level

This system parameter provides a digital level
control for increasing or decreasing the level
sent from the RP's USB port to your computer
recording application� The selectable range is -12
dB to 24 dB� This parameter is only available when
a USB connection has been made to the RP�
To edit the USB RECORD LEVEL parameter:
1�
Connect the RP to your computer using a standard USB cable�
2�
Press the
SYSTEM
3�
Press either the
the upper right-hand corner of the LCD display�
4�
Turn the
EDIT 1
5�
Press the
BACK
the Performance state�
RP360 / RP360 XP
46
button�
knob or
SELECT SYSTEM
( ) knob to adjust the setting�
USB RECORD LVL
button or any
FOOTSWITCH
1 Plexi-Drive
SYSTEM SETTINGS
USB
LOOPER READY
RECORD LVL
0 dB
button repeatedly until the LCD display reads 2/4 in
to exit the System Settings menu and return to
2/4
USB LCD
PLAY MIX CONTRAST
8
USB:RP