Pitch Shift - DigiTech RP360 Owner's Manual

Pitch Shift

Pitch shifting can be used to add a pitched signal or harmonies to a riff, or detune your guitar for lush
chordal effects� The following provides a description of the pitch models available in the RPs and their
associated parameters�
MODULATION – PITCH SHIFT MODELS
Whammy
TM
•
The DigiTech Whammy effect provides a dynamic pitch shifting and harmony effect and is
meant to be used in conjunction with an expression pedal� As the pedal is moved, the note
bends either up or down – the pitch of the note is dependent upon the option selected for
the AMOUNT parameter�
Parameters
NAME OPTIONS OR RANGE
ON/BYP ON, BYPASS
1 OCT UP
2 OCT UP
2ND DOWN
REV 2ND
4TH DOWN
1 OCT DN
2 OCT DN
DIVEBOMB
AMOUNT
MN3>MAJ3
2ND>MAJ3
3RD->4TH
4TH->5TH
5THOCTUP
H OCT UP
H OCT DN
OCTUP/DN
MIX 0 - 99
POSITION 0 - 99
Pitch
•
A pitch shifter copies the incoming signal, then shifts the pitch of the copy to a different note�
The shifted note is then mixed back with the original signal, sounding as if two guitars were
playing different notes�
Parameters
NAME OPTIONS OR RANGE
ON/BYP ON, BYPASS
MIX 0 - 99
SHIFT -24 to +24
DESCRIPTION
Turns the effect on and off�
Selects the interval(s) and direction of the pitch/harmony effect�
Adjusts the balance between the wet and dry signal�
Assign an expression pedal to this parameter for Whammy control�
DESCRIPTION
Turns the effect on and off�
Adjusts the balance between the wet and dry signal�
Adjusts the amount of pitch shift� Ranges from -24 (2 octaves below)
to 24 (2 octaves above)�
RP360 / RP360 XP
99