Deleting Effects - DigiTech RP360 Owner's Manual

Deleting Effects

You can delete unused effects from the effects
chain� This is not absolutely necessary since you
can turn any unused effects off, but removing
unused effects can clean up the Effect Edit menu,
making it more streamlined and easier to edit
effects�
To delete an effect from the effects chain:
1�
From the Performance state, press the
2�
Turn the
SELECT
3�
Press and hold the
4�
Turn the
DELETE
appear in the LCD display� If you change your mind, press the
effect�
5�
Press the
SELECT
and the display will then return to the Effect Options Edit menu�
6�
Press the
BACK
7�
Store the changes to a user preset, see Storing/Copying/Naming Presets on page 17�
knob to select the effect you would like to delete�
knob to access the Effect Options Edit menu�
SELECT
knob to begin the delete procedure� "CLICK TO CONFIRM DELETE" will
knob to confirm deletion� The effect will be deleted from the effects chain
button twice to return to the Performance state�
1
TAPE DELAY
V
O
L
MODEL
knob to enter the Effect Edit menu�
SELECT
RP360 / RP360 XP
Plexi-Drive
MOD
LOOPER READY DLY
MOVE DELETE
button to abort deleting an
BACK
23