Table of Contents
Advertisement
Output Mode
This system parameter has two options: MONO
and STEREO� This parameter determines whether
the outputs are configured for mono or stereo
operation and is only available when a connection
has been made to the LEFT OUT or RIGHT OUT
connector� Changing this parameter will affect all
outputs�
MONO
•
Select this option when connecting to a single amplifier or mixer channel�
STEREO
•
Select this option when connecting to two amplifiers or mixer channels hard panned left and
right�
NOTE: When no connection is made to the 1/4" LEFT OUT or RIGHT OUT connector, the
STEREO option will automatically be selected behind the scenes, providing stereo operation
when using the 1/8" HEADPHONE output or recording using the USB output�
To edit the OUTPUT MODE option:
1�
Press the
SYSTEM
indicated by 1/4 being displayed in the upper right-hand corner of the LCD display� If you are
not, press either the
1/4�
2�
Turn the
EDIT 3
3�
Press the
BACK
the Performance state�
button� Ensure you are on the first page in the System Settings menu,
knob or
SELECT
SYSTEM
(
) knob to select the desired option�
OUTPUT MODE
button or any
FOOTSWITCH
1
Plexi-Drive
SYSTEM SETTINGS
FOOTSWITCH
OUTPUT
LOOPER READY
MODE
PRESET
AMP
STOMP
MIXER
BANK
button repeatedly until the LCD display reads
to exit the System Settings menu and return to
RP360 / RP360 XP
1/4
OUTPUT
TO
MODE
MONO
STEREO
45
Hide quick links:
Advertisement
Table of Contents
