Tap Delay - DigiTech RP360 Owner's Manual

DELAY MODELS
Lo Fi Delay
•
The Lo Fi delay is an analog delay with a severely limited frequency response, producing an
even grungier delay effect�
Parameters
NAME OPTIONS OR RANGE
ON/BYP ON, BYPASS
TIME 0 - 5�000 SEC
REPEATS 0 - 99, HOLD
LEVEL 0 - 99
3 QUARTER,
TAP DIV EIGHT, DOT EIGHT,
QUARTER, HALF

2-Tap Delay

•
While most delays are derived from a signal delay with one end tap, the 2-Tap Delay uses a
single delay line, but with two end points that are spaced about at different ratios� Use this
effect to add more of a rhythmic quality to your delays�
Parameters
NAME OPTIONS OR RANGE
ON/BYP ON, BYPASS
TIME 0 - 5�000 SEC
REPEATS 0 - 99, HOLD
LEVEL 0 - 99
RATIO 0% - 99%
3 QUARTER,
TAP DIV EIGHT, DOT EIGHT,
QUARTER, HALF
DESCRIPTION
Turns the effect on and off�
Sets the delay time�
Sets how many delay repeats will occur� The lowest value equals one
repeat� Higher values equal more repeats and the highest value equals
repeat hold (infinite repeats)�
Adjusts the output level of the effect�
Sets the delay tap divider rate or the note value at which the delay will
occur�
DESCRIPTION
Turns the effect on and off�
Sets the delay time�
Sets how many delay repeats will occur� The lowest value equals one
repeat� Higher values equal more repeats and the highest value equals
repeat hold (infinite repeats)�
Adjusts the output level of the effect�
Adjusts the distance between the two delay taps� Higher values create
greater distance between the taps�
Sets the delay tap divider rate or the note value at which the delay will
occur�
RP360 / RP360 XP
73