Expression Pedal; Lfo - DigiTech RP360 Owner's Manual

Expression Pedal

Selecting the Expression Pedal icon accesses settings to assign a parameter for expression pedal
control and set the minimum (toe up) and maximum (toe down) control limit values� See Expression
Pedal Control on page 34 for further information on configuring and using the Expression Pedal
built into the RP360XP or an external expression/volume pedal connected to the RP360�
Parameters
NAME OPTIONS OR RANGE
PARAMETER
Varies
SELECT
MIN Varies
MAX Varies

LFO

Selecting the LFO icon accesses settings to assign a parameter for LFO control� You can also set the
minimum and maximum range control limits, adjust the speed, and select the waveform type� See
Assigning The LFO on page 36 for further information on configuring and using the LFO for
modulating effect parameters�
Parameters
NAME
PARAMETER
CONTROLLED
MIN
MAX
SPEED
WAVEFRM
RP360 / RP360 XP
84
E
X
P
DESCRIPTION
Selects the desired parameter for control�
Sets the minimum capable value when the expression pedal is in its toe up
position�
Sets the maximum capable value when the expression pedal is in its toe down
position�
OPTIONS OR RANGE
Varies based on selection Selects the parameter you want the LFO to control�
Varies based on selection Adjusts the minimum value the LFO will set the parameter to
Varies based on selection
0�05 HZ - 10�00 HZ
TRIANGLE, SINE,
SQUARE
DESCRIPTION
when it reaches the lower limit of its waveform�
Adjusts the maximum value the LFO will set the parameter to
when it reaches the upper limit of its waveform�
Adjusts the rate at which the LFO will modulate the assigned
parameter�
Selects the shape of the LFO waveform which changes the
timing characteristics of the LFO modulation�