Table of Contents
Advertisement
This product uses fuel effect pieces. It makes sense to take
care when handling these articles to ensure that the release
of dust is kept to a minimum.
Inlet Pressure
Input - Max. (Gross)
Input - Min. (Gross)
Output - Max.
Output - Min
Burner Test Pressure (Cold)
Gas Connection
Burner Injector
Pilot & Atmosphere Sensing
Device
Ignition
Aeration
*
When converted using Kit 591149
2.1
For the user' s protection, in the United Kingdom
it is the law that all gas appliances are installed by
competent persons in accordance with the current
edition of the Gas Safety (Installation and Use)
Regulations. Failure to install the appliance
correctly could lead to prosecution. The Council
for the Registration of Gas Installers (CORGI)
requires its members to work to recognised
standards.
The Confederation for the Registration of Gas
Installers (CORGI) requires its members to work
to recognised standards.
The installation must be in accordance with these
instructions.
In the United Kingdom the installation must also
be in accordance with:
a) All the relevant parts of local regulations.
b) The
current
Regulations issued by the Department of the
Environment and the Welsh Office or the
Building
(Consolidation) Regulations issued by the
Scottish Development Department.
c) All relevant codes of practice.
1.
Gas
20mbar
6.0kW (20,500Btu/h)
2.2kW (7500Btu/h)
3.5kW (11,900Btu/h)
1.1kW (3750Btu/h)
17.0±0.75mbar
w.g.)
8mm pipe
Bray Cat. 18 Size 360
SIT Ref. OP9030
Piezo Electric. Integral with
Gas Tap
Non-adjustable
2
GENERAL INSTALLATION REQUIREMENTS
edition
of
the
Building
Standards
(Scotland)
APPLIANCE DATA
This
appliance
manufactured from asbestos or asbestos related products.
The appliance data label is on a plastic tie below the burner
and is visible when the bottom front cover is removed.
Natural (G20)
37mbar
6.1kW (20,800Btu/h)
3.6kW (12280Btu/h)
3.6kW (12,280Btu/h)
1.8kW (6140Btu/h)
(6.8±0.3in
35.6±0.75mbar
(14.3±0.3in w.g.)
8mm pipe
Bray Cat. 18 Size 170
SIT Ref. OPLPG9222
Piezo Electric. Integral with
Gas Tap
Non-adjustable
d) The relevant parts of the current editions of
the following British Standards:-
BS 715
BS 1251
BS 1289 Part 1
BS 1289 Part 2
BS 4543 Part 2
BS 5440 Part 1
BS 5440 Part 2
BS 5871 Part 2
BS 6461 Part 1
BS 6891
BS 8303
In the republic of Ireland the installation must
also conform to the relevant parts of:
a) The current editions of:-
IS 813
ICP3
IS327
All relevant national and local rules in force.
2.2
In the United Kingdom, as supplied, this
appliance can be installed in the following
situations: -
2.2.1
To a fireplace complete with surround and hearth
complying with B.S 1251. The required fireplace,
hearth, debris catchment area and clearance
dimensions are shown in figure 1a.
2.2.2
To a fireplace incorporating a twin walled metal
flue box complying with the constructional
requirements of the current edition of BS 715 and
standing
dimensions of the flue box must conform to the
opening shown in figure 1b. For flue details see
sections 2.3 & 2.4.
4
does
not
contain
any
Propane (G31)*
on
a
non-combustible
component
base.
The
Hide quick links:
Advertisement
Table of Contents
