Histogram; Temporary Activation/Deactivation Of Individual Functions - Leica SL2-S Instruction Manual

HISTOGRAM

Histogram represents the brightness distribution in the image. The
horizontal axis shows the graduated values from black (left) through
gray to white (right). The vertical axis corresponds to the number of
pixels at each brightness level.
This type of rendering allows an additional quick and easy assessment
of the exposure setting.
Notes
• The histogram is always based on the brightness displayed;
depending on the settings used, it may not represent the final
exposure.
• In shooting mode, the histogram should be regarded as a "trend
indicator".
• The histogram during rendering may differ slightly from the one
during exposure.
• The Histogram always refers to the currently displayed cropped
section of the image.
TEMPORARY ACTIVATION/DEACTIVATION OF INDIVIDUAL
FUNCTIONS
The following assist functions can be activated/deactivated tempo-
rarily:
– Focus peaking
– Clipping
▸ Assigning the desired assist function to a function (see p. 71)
▸ Press the corresponding function button
• The status of the assist function toggles On/Off.
• A relevant indicator appears in the screen image.
The temporary setting is reset when the user switches to another
info profile or the camera is switched off.
PRACTICAL DEFAULT SETTINGS ▸ AUXILIARY DISPLAYS
109