Nuvo NV-T2DAB Installation Manual page 20

T2DAB Options (Fig. 22): Tuning parameters for the
T2DAB are easily set from any Control Pad using this
menu. There are three sub-menu choices:
Edit Presets (Fig. 23): This allows the user to
establish the current channel or station
frequency as a preset. The menu provides
five banks of 20 presets each. Choosing a
preset bank will then give you the option of
saving the current channel. To add a preset to
favorites, highlight and select an existing
preset. This will bring up a second menu with
several choices. Delete Preset, will erase the
highlighted preset from the list. Add to
Favorites places the highlighted preset into
the Favorites menu available at each Control
Pad. Move Up and Move Down moves the
highlighted preset up or down within the list
of presets. Move to Top and Move to Bottom
places the highlighted preset in the number 1
position or to the last available position.
Seek Tune: Selecting Seek Tune turns the
frequency seek function on and off. When
check marked, seek is active. This is an
AM/FM function that allows the Tuner to
search within the selected band until a strong
signal is found. The level of signal necessary
for the seek function can be set within the
T2DAB menu, see Section II. T2DAB Settings,
Seek Threshold, pg. 11 .
Tuning Mode: Tuning Mode changes the
tuning between Seek Mode and Preset Mode.
If Preset is chosen, touching the arrow
forward button >>, or arrow back button <<,
scroll through the saved presets.
Fig. 22
T2DAB Options
Edit Presets
Seek Tune
Tuning Mode
Fig. 23
Edit Presets
My Presets 1 My Presets 1
My Presets 2
My Presets 3
My Presets 4
My Presets 5
Assign Preset
Assign to Current Chan
My Presets 1
1: FM 87.9
2:
3:
4:
5:
6:
15