T2Dab Options; Dab Scan; Dab Order; Edit Presets - Nuvo NV-T2DAB Installation Manual

T2DAB Options (Fig. 10)
The T2DAB Options menu allows the user to edit the presets,
configure the tuning mode and modify the stored DAB channel
list. The following submenus will be displayed:
DAB Scan: This menu item provides the ability to scan
for new available DAB ensembles and their related
channels. A full scan is done in the initial setup of the
tuner. This searches for all available channels within
the user's listening area. At each subsequent power up
a quick scan is done to search for any new channels.
Typically after setup there is no need for a full scan,
but the "DAB Scan" selection allows a subsequent
scan if necessary.
DAB Order: This allows a simple choice between
sorting channels by ensembles or alphanumerically.
Edit Presets (Fig. 11): This is a great tool for allowing
a currently selected channel to be saved as a preset.
As a number preset is selected, the display will
prompt to "Assign to current channel".When
selected, the T2DAB will save the frequency
and associated short name of the channel. There are
5 banks of 20 presets each available. To add a preset
to favorites, highlight and select an existing preset.
This will bring up a second menu with several
choices: Delete Preset, which will erase the
highlighted preset from the list; Add to Favorites
places the highlighted preset into the Favorites menu
available at each Control Pad; Move Up and Move Down
moves the highlighted preset up or down within the
list of presets; Move to Top and Move to Bottom places
the highlighted preset in the number 1 position or to
the last available position.
Tuning Mode (Fig. 12): Tuning Mode has three choices
that set defaults for the way in which the T2DAB
will tune through channels or frequencies.
Step Tune: Step Tune simply tunes to the next
available frequency or channel for the
selected band.
Seek Tune: Seek Tune searches for strong
frequencies in the FM band and will stop at
the next frequency that meets the set tuning
parameters. This menu option turns seek on
or off. When Seek Tune is turned off, Step
Tune is the default.
Fig. 10
DAB Options

DAB Scan

DAB Order

Edit Presets

Fig. 11
Edit Presets
Delete Preset
Add to Favori...
Move Up
Fig. 12

Tuning Mode

Step Tune
Seek Tune
Preset Tune
Preset Tune: When turned on, the Preset Tune
mode will only stop at channels or
frequencies that have been saved as presets
in the current band.
10