Iii. Nuvonet Control Of The T2Dab; Tuning Up And Down; Changing Bands; Tuning Modes - Nuvo NV-T2DAB Installation Manual

Dual am/fm tuner
Table of Contents

Advertisement

III. NuVoNet Control of the T2DAB

NuVoNet allows the Grand Concerto and Essentia E6G Control
Pad to completely control the T2DAB functionality. The
important feature of the Control Pad is its multi-line OLED,
organic light emitting diode, display which give complete
tuner function feedback.
Tuning Up and Down (Fig. 17)
Tuning at the NuVo Control Pad is accomplished by touching
arrow forward >> or arrow back <<. A single touch advances one
station frequency based on the tuning method selected, and a
touch and hold will rapidly change the channel or frequency.
Changing Bands (Fig. 18)
In normal play mode, touching the Play/Pause button changes
the broadcast band. This can also be done in the Bands menu
selection. If a band has been turned off, (see II. T2DAB Front
Panel Menu, T2DAB Settings, Enabled Bands, pg. 10), only the
enabled bands will be present.

Tuning Modes

The available tuning modes are Seek and Preset tune. Seek is
an AM/FM function that searches for frequencies strong
enough to latch onto. Preset tune moves to the next preset in
the list. Touching and holding the Play/Pause button advances
to the next tuning mode, seek or preset.

Selecting Tuner A or B

In normal play mode, selecting a new source is done by
touching the OK button. Each touch will advance to the next
source. Accessing the sources can also be done from the
Sources menu at each Control Pad.
Fig. 17
FM
KROCK 89.9 (P101)
drift
Follow the Day
MENU

Tuning Up and Down

Fig. 18
FM
FM 92.9
Fly 92.9
MENU
Change Tuner Bands
13
3:09 PM
OK
3:15 PM
OK

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents