Diagnostics; Reset Memory - Nuvo NV-T2DAB Installation Manual

Diagnostics (Fig. 16): Signal strength for AM, FM and
reception and the current firmware version number
are provided in the Diagnostics menu.
Version: This displays the T2DAB's current
firmware version. Upgraded versions are
posted on the NuVo website ProZone and are
loaded onto the Tuner by downloading a new
configuration from the Tuner Configurator
software through the RS232 port.
AM/FM Signal Strength (Fig. 17): This
displays two levels for tuners A and B. RSSI,
received signal strength indicator, is a
measurement in dBuV, and SNR, signal to
noise is measured in dB.
Reset Memory (Fig. 18): This should be used only
when it is advantageous to remove all settings from
the tuner. Choosing yes to reset memory returns the
T2DAB to its factory default, and will clear all presets
and favorites. As a precaution, a yes or no prompt will
appear before the reset is completed.
Fig. 16

Diagnostics

Version
Signal Streng..
Fig. 17
FM Strength
RSSI: 60 dBuV
SNR: 31 dB
Fig. 18
T2DAB Settings
Brightness
Diagnostics

Reset Memory

Are You Sure?
No
Yes
12