KVH Industries V7 User Manual page 68

TracPhone V7 User's Guide
Chapter 4 - Troubleshooting
68
Status Message
RF HAZARD ZONE 1
335-025
RF HAZARD ZONE 2
225-265
XMT IN ZONES
NO
ANTENNA DC INPUT
41.2 VDC
CTRL UNIT DC INPUT
13.4 VDC
BUC POWER ON
21.4 VDC
ANTENNA MODEL
TRACPHONE V7
ANTENNA SERIAL #
070901234
ANTENNA MAIN BOARD
SW VERSION 2.34
ANTENNA RF BOARD
SW VERSION 1.23
ANTENNA AZ/EL MOTOR
SW VERSION 1.28
Description
Current setting for RF hazard
zone #1
Current setting for RF hazard
zone #2
Current setting for XMT in Zones:
• No - Transmission is inhibited
if antenna points within a zone
• Yes - Transmission unrestricted
DC voltage measured at the
antenna's circuit board; should be
greater than 39 VDC
DC voltage measured at the
control unit's power input; should
be greater than 12.5 VDC
Status of the antenna's BUC
(transmit) power:
• On - BUC power is applied; also
reports actual measured power
• Off - BUC power is disabled
Should be greater than 20 VDC
Antenna model
Antenna serial number
Main software version
RF software version
Azimuth/elevation motor
software version