KVH Industries V7 User Manual page 32

TracPhone V7 User's Guide
Chapter 3 - Configuration
Disabling RF Radiation Hazard Zones
30
If you wish to remove all restrictions on transmissions, follow the
steps below to disable your programmed RF radiation hazard zones.
This function simply disables the hazard zones; it does not delete them
from memory.
Disabling RF radiation hazard zones allows the antenna to transmit
in any direction, even if the antenna is pointing in an area accessible
to passengers and crew. Make certain that everyone stays a
minimum safe distance away from the antenna before you transmit.
Also be sure to return to this menu and restore the hazard zones
when you are done transmitting.
NOTE: You can view the currently programmed hazard zones in the control
unit's Antenna Status menu (see
1. Press MENUS until the display shows
"CONFIGURATION."
CONFIGURATION
NEXT MENU
2. Press ACCEPT.
BRIGHTNESS= HIGH
NEXT ITEM
"Antenna Status Information" on page
ACCEPT
CHANGE
66).