KVH Industries V7 User Manual page 23

Sending or Receiving a Fax
You can also fax documents via the enhanced voice service. Connect a
fax machine to either "PHONE" jack on the MTA and dial as you
would a voice call (see
NOTE: Faxing requires 70k bandwidth for sending and up to 90k bandwidth
for receiving. When fax and voice are used simultaneously on both MTA
ports, the bandwidth requirement increases to between 100k and 170k.
Faxing over Internet Protocol can be unreliable at times. Therefore, if
you require an enterprise-grade fax solution, install KVH's optional
UCH-250 Fax Server (KVH part #19-0520). When you activate its
corresponding fax service, the UCH-250 gives you an additional
phone number dedicated for faxing, freeing up a "PHONE" jack on
the MTA. Contact your dealer/distributor for details.
Managing Your Voice Account Online
You can manage your account online at your Enhanced Voice Service
web page. You can view and configure all of the various calling
features available to you, as well as view account information and
listen to VoiceMails. To log onto the site, follow the steps below:
1. Go to http://kvh.myaccountcenter.net.
2. At the login page, enter your primary phone number
and PIN (provided during service activation).
NOTE: You can also contact Customer Support by dialing 611 on your
telephone handset.
"Placing a Voice Call" on page
TracPhone V7 User's Guide
Chapter 2 - Operation
16).
19