Table of Contents
Advertisement
2. In the User Accounts list, indicate whether the use of user names and passwords to
access the device with the web interface or the command line interface is enabled. If
disabled (default), anybody can access the device.
3. In the Administrator User Name box, enter the alphanumeric string identifying the
administrator user.
4. In the Administrator Password box, enter the alphanumeric string protecting the
access to the device for the administrator user.
5. In the Web Client x User Name box, enter the alphanumeric string identifying a web
client user.
6. In the Web Client x Password box, enter the alphanumeric string protecting the
access to the device for a web client user.
7. If required, repeat the web client configuration steps for all web client users. Up to five
web clients are available.
8. To continue the configuration process, select another parameter category in the
navigation pane. Otherwise, click Apply to save the changes in the device. Depending
on the changes you made, a reboot may be required; follow the on-screen instructions
in the Device Configuration Submittal pane.
Security
The security parameters are relative to the protection of the device.
To configure the security parameters:
1. In the navigation pane, expand Configuration > Access Management, then click
Security. The security parameters appear.
2. In the Telnet Session list, indicate whether the access to the CLI of the device with
Telnet is enabled.
3. In the XML Report Generation list, indicate whether the generation of an XML report
presenting the current state of the device is enabled.
Verint Video Intelligence Solutions
Nextiva S2750e Series User Guide
25
Advertisement
Table of Contents
