Mounting The Camera; Preparing The Camera - Verint Nextiva S2750eN User Manual

Mounting the Camera

You can mount the S2750e camera the following ways:
Mounting directly on the ceiling or wall
Mounting on an electrical box (North America box styles only)
The mounting procedure involves the following main steps:
1. Preparation
2. Physical installation
To install the camera, you need the following equipment:
A Phillips screwdriver
Four mounting screws, if the camera goes on the ceiling or wall:
Screw size: #10
Maximum screw head diameter: 0.37 inch (9.5 mm)
Maximum screw head height: 0.14 inch (3.5 mm)
Casing height: 0.9 inch (23 mm)
Two mounting screws, if the camera goes on an electrical box
Note: Select the screw type depending on the material on which the device will be
mounted.

Preparing the Camera

The first step in mounting the camera is preparing the surface and taking the camera apart.
Verint Video Intelligence Solutions
Nextiva S2750e Series User Guide
7