Table of Contents
Advertisement
2: Mounting and Configuring the IP Camera
5. In the Video list, select the desired transmission mode for video data. The available
values are:
RTP/UDP—A video mode using RTP (Real Time Transport Protocol, RFC 3550) over
UDP. It is the preferred mode for LAN environments; however, it does not guarantee
proper reception of packets. (default)
VSIP/UDP—A legacy mode, using the proprietary VSIP video protocol over UDP. The
preferred UDP mode is RTP/UDP.
RTP/TCP—A video mode using RTP (Real Time Transport Protocol, RFC 3550) over
TCP. It can be useful over WANs, Internet, or LANs needing more robust or secure
connections. This mode guarantees proper reception of packets, but could slow
down the effective frame rate to a level which is not acceptable.
VSIP/TCP—A legacy mode, using the proprietary VSIP video protocol over TCP. The
preferred TCP mode is RTP/TCP.
6. Click Connect.
7. In the SConfigurator confirmation window, click OK.
You should now have video on the analog monitor connected to the receiver.
18
Verint Video Intelligence Solutions
Advertisement
Table of Contents
