Table of Contents
Advertisement
3: Using the Web Interface
Viewing the Quick Status
The Quick Status pane presents a summary of the device. It is the default view when you
access the web interface. You may need to provide some of these internal parameters to
customer service specialists for troubleshooting purposes. For a more complete view of
internal parameters, look at the system status (described on page page 27).
To access the web interface:
1. Open a Microsoft Internet Explorer window.
2. In the Address box, enter the IP address of the device using the http://IP_address
format. The web interface window appears.
Navigation pane
The web interface is composed of the following graphical elements:
Product type—The type of the device.
Device name—The descriptive name of the device. Go to page 35 to change it.
IP address—The IP address of the device.
Navigation pane—The types of information that are available in the web interface.
Main pane—The area where to configure the device, view data, and perform
maintenance tasks.
Firmware version—The current firmware version of the main processor of the
device. The latest firmware files are available on the Verint Video Intelligence
Solutions extranet.
Uptime—The time since the device has been rebooted, using the following format:
x days hh:mm:ss; the "days" portion does not appear if the uptime is less than one
day. The uptime is not automatically refreshed; press F5 to update it.
22
Verint Video Intelligence Solutions
Advertisement
Table of Contents
