Table of Contents
Advertisement
4. Adjust the pan angle by turning the pan rim to the right or to the left (360 degrees of
liberty). You will hear clicks as you turn the rim.
5. Adjust the tilt angle by pushing the tilt rim to the right or to the left (90 degrees of
liberty). You will hear clicks as you push the rim.
6. Using the two rotation knobs, position the TOP mark on the sensor module so that the
arrow points towards the top of the image.
7. Adjust the field angle and the focus with the adjustment knobs on the lens:
a. To zoom out to see the full spectrum, move the zoom knob towards the W (wide)
mark.
b. To concentrate on a specific area, move the zoom knob towards the T (telephoto)
mark.
c.
To focus on a near object, move the focus knob towards the N (near) mark.
d. To focus on a far object, move the focus knob towards the infinite mark.
8. To activate back light compensation for adjusting the exposure level to allow more
detail to be viewed, put the BLC DIP switch to the ON position.
ON
1
2
Verint Video Intelligence Solutions
Zoom adjustment ring
Zoom knob
Focus knob
Focus adjustment ring
Nextiva S2750e Series User Guide
Rotation knobs
Tilt rim
DIP switches for BLC
Pan rim
and AGC
TOP mark
13
Advertisement
Table of Contents
