Introduction; Document Conventions; Warnings; Site Preparation - Motorola AP650 Installation Manual

Hide thumbs Also See for AP650:
Table of Contents

Advertisement

4
1

Introduction

The AP650 access point, a component of the Motorola Wireless Controller System, links wireless 802.11a/b/g/n
devices to the controller, enabling growth of your wireless network with a cost-effective alternative to standard
Access Points. The AP650 access point provides two placement options: wall and ceiling. Wall mount slots fit onto
two screws provided. Arrows on the case guide placement of the screws. For placement above a suspended ceiling,
a safety wire tie point on the case provides for a loop of safety wire. The light pipe fits through a hole in the ceiling
tile to provide a view of the unit's status lights.
The AP650 access point receives all power and transfers data through the same CAT-5 or better Ethernet cable.
There is no additional power supply required. An 802.3af Ethernet switch, PoE enabled controller or power injector
is required.

1.1 Document Conventions

The following graphical alerts are used in this document to indicate notable situations:
NOTE
CAUTION
WARNING!

1.2 Warnings

Read all installation instructions and site survey reports, and verify correct equipment installation before connecting the AP650
Access Point.
Remove jewelry and watches before installing this equipment.
Verify that the unit is grounded before connecting it to the power source.
Verify that any device connected to this unit is properly wired and grounded.
Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment operation specifications.

1.3 Site Preparation

Consult your site survey and network analysis reports to determine specific equipment placement, power drops, and so on.
Assign installation responsibility to the appropriate personnel.
Identify and document where all installed components are located.
Ensure adequate, dust-free ventilation to all installed equipment.
Identify and prepare Ethernet and console port connections.
Tips, hints, or special requirements that you should take note of.
Care is required. Disregarding a caution can result in data loss or
equipment malfunction.
Indicates a condition or procedure that could result in personal injury or
equipment damage.
AP650 Access Point

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents