Bl001; Circulating Pumps - Electro Industries EB-MA-10 User Manual

TWO SUPPLY WATER TEMPERATURE REQUIREMENT
•
Handled as the priority zone on multi-zone (EB-ZEA-1) or two
pump (EB-Z2P) controllers
•
Priority switch on, zone 1 active - TS boiler automatically changes
to 150° (or selection 176°) supply water setting
•
All other zones are held off
•
With zone 1 satisfi ed or 60-minute timeout, the boiler automatically
returns to the preset temperature and reacts to the other zones
INSTALLATION PLUMBING KITS
These installation kits provide the critical plumbing components needed for easy installation of the Electro-Boiler. In addition to the
items shown in the matrix below, each kit includes all necessary ball valves, drain valve, tees, elbows, nipples, bushings, couplings,
etc. for direct connection to circulator pump and/or manifold.
Electro Industries' boilers come standard equipped with outlet temperature/pressure gauge, pressure relief safety valve, and when
applicable, the WarmFlo TM
Model
EMB-BK
EMB-PK
EB-PK-M EB-MS, -MA, -MO Series
EB-BK-TS EB-S, -WA, -WO Series
EB-PK-TS EB-S, -WA, -WO Series

CIRCULATING PUMPS

5585 - Mini-Boiler &
10 kW TS Series
•
120V, 1/25 HP, maintenance-free wet
rotor circulator
•
Pump curve example - 5 GPM (19 L)
@ 11 ft. of head (32.9 kPa)
07/24/2007
electronic control sensors. These kits provide the additional components for easy installation:
Application Return Gauge
All EMB Series
All EMB Series
5586 - TS Series, Standard
•
120V, 1/6 HP, maintenance-free oil
lubricated circulator
•
Pump curve example - 10 GPM (37.8 L)
@ 20 ft. of head (50.8 kPa)
Low Temp
Radiant, slab Radiant, staple up
Radiant, slab Baseboard
Radiant, slab Fan coil
Radiant, slab Water heater, side arm
Radiant, slab Hanging unit heater (garage, shop, etc.)
Expansion Tank
2.1 gal. (7.9 L), 40,000 Btu/h
2.1 gal. (7.9 L), 40,000 Btu/h
4.5 gal. (17 L), 135,000 Btu/h Enhanced air separator, EAS
4.5 gal. (17 L), 135,000 Btu/h
4.5 gal. (17 L), 135,000 Btu/h Enhanced air separator, EAS
•
Two fl anges, with isolation valve
High Temp
Air Vent
Basic fl oat type
Enhanced air separator, EAS
Basic fl oat type
5578 - 3/4" Pipe
5582 - 1" Pipe
5579 - 1-1/4" Pipe

BL001