Bl001 - Electro Industries EB-MX-10 Installation & Operating Instructions Manual

TWO SUPPLY WATER TEMPERATURE REQUIREMENT
•
Handled as the priority zone on multi-zone (EB-ZEA-1) or two
pump (EB-Z2P) controllers
•
Priority switch on, zone 1 active - TS boiler automatically changes
to 150° (or selection 176°) supply water setting
•
All other zones are held off
•
With zone 1 satisfi ed or 60-minute timeout, the boiler automatically
returns to the preset temperature and reacts to the other zones
INSTALLATION PLUMBING KITS
These installation kits provide the critical plumbing components needed for easy installation of the Electro-Boiler. In addition to the
items shown in the matrix below, each kit includes all necessary ball valves, drain valve, tees, elbows, nipples, bushings, couplings,
etc. for direct connection to circulator pump and/or manifold.
Electro Industries' boilers come standard equipped with outlet temperature/pressure gauge, pressure relief safety valve, and when
applicable, the WarmFlo TM
Model
EMB-BK
EMB-PK
EB-PK-M EB-MS, -MA, -MO Series
EB-BK-TS EB-S, -WA, -WO Series
EB-PK-TS EB-S, -WA, -WO Series
CIRCULATING PUMPS
5585 - Mini-Boiler &
10 kW TS Series
•
120V, 1/25 HP, maintenance-free wet
rotor circulator
•
Pump curve example - 5 GPM (19 L)
@ 11 ft. of head (32.9 kPa)
03/05/2014
electronic control sensors. These kits provide the additional components for easy installation:
Application Return Gauge
All EMB Series
All EMB Series
5586 - TS Series, Standard
•
120V, 1/6 HP, maintenance-free oil
lubricated circulator
•
Pump curve example - 10 GPM (37.8 L)
@ 20 ft. of head (50.8 kPa)
Low Temp
Radiant, slab
Radiant, slab
Radiant, slab
Radiant, slab
Radiant, slab
Expansion Tank
2.1 gal. (7.9 L), 40,000 Btu/h

2.1 gal. (7.9 L), 40,000 Btu/h

4.5 gal. (17 L), 135,000 Btu/h Enhanced air separator, EAS
4.5 gal. (17 L), 135,000 Btu/h

4.5 gal. (17 L), 135,000 Btu/h Enhanced air separator, EAS
High Temp
Radiant, staple up
Baseboard
Fan coil
Water heater, side arm
Hanging unit heater (garage, shop, etc.)
Air Vent
Basic fl oat type
Enhanced air separator, EAS
Basic fl oat type
5578 - 3/4" Pipe
5582 - 1" Pipe
5579 - 1-1/4" Pipe
•
Two fl anges, with isolation valve

BL001