Electro Industries EB-MA-10 User Manual page 7

2. This installation manual and Electro-Boiler products relate only to the addition of the Electro-Boiler
to the hydronics system. The owner/ installer assumes all responsibility and/or liability associated
with any needed installation of the gas/oil boiler, pump, plumbing, system design, hydronics systems
or backup gas/oil boiler, etc. Any instructions or comments made within this manual (or factory
phone assistance) relating to the gas/oil furnace are provided as comments of assistance and "helps"
only.
CAUTION
Hazards or unsafe practices could result in property damage, product damage, severe personal
injury and/or death.
3. Remember, safety is the installer's responsibility and the installer must know this product well
enough to instruct the end user on its safe use.
Safety is a matter of common sense - - a matter of thinking before acting. Professional installers have
training and experienced practices for handling electrical, sheet metal, and material handling
processes. Use them.
CLEARANCES
BACK
LEFT
RIGHT
FRONT
TOP
BOTTOM
09/15/2014
MINIMUM CLEARANCE FROM
COMBUSTIBLE SURFACES
0 INCH 0 MM
1 INCH 25 MM
1 INCH 25 MM
1 INCH 25 MM
1 INCH 25 MM
REQUIRED CLEARANCE – 18 INCHES/457 MM
SUGGESTED MINIMUM
SERVICE CLEARANCE
0 INCH
12 INCHES
6 INCHES
24 INCHES
24 INCHES
5
0 MM
305 MM
152 MM
610 MM
610 MM
BI5096