Table of Contents
Advertisement
Using the Web UI
28
3004149-0001 Revision C
If you want to setup additional ranges of addresses, please follow
the same instructions as above.
You cannot overlap the IP address ranges. If you do, an error
message will pop-up telling you that you have an overlap region.
Check all of the ranges for overlaps and try again.
When you are finished, click on Update Static Settings and you
should see a message saying "Operation Successful".
DHCP Automatic Contexts: This option allows you to set up
the UT for dynamic standard ACA. This means that any device
connected to the UT via DHCP, whether wired or wirelessly,
will automatically receive a standard context. Note: Streaming
contexts are not supported with DHCP ACA. For Streaming
contexts, you must use Static ACA, described above.
Advertisement
Table of Contents
