Whirlpool Rooper Service Manual page 37

Refer to the inset and main illustration for the
following steps.
9. Remove the upper console screws from the
back and the two screws from the endcaps
that secure the upper console to the side
panels.
10. Lift the upper console assembly straight up
and off the range.
REMOVE THESE
TWO SCREWS
AT BOTH SIDES
OF THE RANGE
TO REMOVE THE
UPPER CONSOLE
REMOVE THESE 2 SCREWS
AT BOTH ENDS OF THE
UPPER CONSOLE TO DISASSEMBLE
AND REASSEMBLE THE UPPER CONSOLE
CONSOLE PANEL
3-11
Cooking Products Service Manual
Original July, 1996
© 1996 Whirlpool Corporation
11. Remove the heat shield from the upper con-
sole.
12. Remove the screws from the left and right
endcaps and endcap posts and remove them
from the upper console.
13. Reassemble the new components to the up-
per console and mount the console to the
range. REASSEMBLY NOTE: When you in-
stall the manual oven light switch, position it
with the rocker arm color in the same direction
as when you removed it.
14. Reassemble the range.
CONSOLE
PANEL
HEAT
SHIELD
(2)
& HEAT SHIELD
SCREWS
REMOVE THESE TWO SCREWS
4321892
Page 3-11
CONTROL
SCREW
OVEN CONTROL
MANUAL OVEN
LIGHT SWITCH
ENDCAP POST
ENDCAP
TO FREE UPPER CONSOLE