Disc Dubbing - JVC XL-R2010BK Instructions Manual

1
Start playback the CD to be recorded.
2
Insert a recordable CD-R or CD-RW disc in the
CDR disc tray.
• The disc is read.
3
While the disc is playing back the track you
want to record or if that track is being paused,
press CD REC (main unit/remote control).
Main Unit
CD REC
"1TR DUBBING" is shown in the information display.
• When a blank disc is in the CDR tray, "UPDATE OPC" is
shown following "1TR DUBBING".
When "ADD FINALIZE?" is shown in the information
window:
• No response (no input) assumes that finalization is to be per-
formed, or you can press the SET button (main unit/remote con-
trol) to confirm that finalization is to be done. Press the
CANCEL button (main unit/remote control) to keep the disc
unfinalized.
Note
• This message will not be shown if the menu FINALIZE func-
tion setting is "OFF". The default setting is "ON".
The CD restarts playback from the beginning of the track
and the CDR starts recording simultaneously.
• When a track is recorded, its digital signals are recorded in their
original form. A new track mark is automatically placed at the
beginning of the track being recorded.
• As high-speed recording is performed (CD-R 4x, CD-RW 2x),
there is no audio output during the recording process. When
recording at normal speed, follow the procedure for "Setting the
Unit for High-speed Recording" (see page 28) and start recording
after setting the speed to normal speed. You can listen to the source
while it is being recorded.
When recording completes
"STOP DUBBING" flashes and recording automatically stops.
When recorded without canceling "ADD FINALIZE?"
"FINALIZE" is shown in the information window after recording
is stopped and finalization is automatically performed.
To stop recording at any time
Press the CD or CDR STOP 7 button on the main unit or the 7
(stop) button on the remote control to end recording. The recording
mode is released after "STOP DUBBING" is shown in the infor-
mation display.
24
PLAY
Remote Control
CD REC
Notes
• There is no need to adjust the recording level.
• If the source CD being recorded from the CD player is itself a
first-generation digital copy, digital recording cannot be per-
formed. When this occurs, the recording type will switch from
digital to analog automatically.
• Upon completion of recording, "STOP DUBBING" is shown in
the information display. Always wait for the "STOP DUBBING"
message to be cleared before proceeding with the next operation.

1 Disc Dubbing

• You can make a complete copy of a CD that you want to record
onto a CD-R/CD-RW disc. When recording a CD with song
numbers but no silence between songs such as a live CD, for
example, you can use the 1 DISC DUBBING feature to make a
recording without any silence.
XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER
STANDBY OPEN/CLOSE
DIGITAL
STANDBY/ON
PLAY MODE CD EDIT CD REC
LEVEL PHONES
REC SOURCE
STOP PLAY PAUSE
SELECTOR
MIN MAX
1
10
PLAY
MODE
•
REC
REC MUTING
1
3
4,5
RM–SXLR2010A
1
Stop the CD to be recorded.
PLAY
2
Load a recordable CD-R or CD-RW disc into the
CDR and close the tray.
• The disc is read.
3
Press the MENU button (main unit/remote
control), and then turn the MULTI JOG control on
the main unit or press the
remote control until "1 DISC DUBBING" is
shown in the information display.
4
Press the SET button.
"DUBING READY?" is shown in the information display.
• Only the selected CD is recorded.
2 3
MULTI JOG/REC LEVEL
REC SOURCE OPEN/CLOSE
CD LINE MIC
–
SYNCHRO MENU SET CANCEL
LINE CD
MIX BLANCE
MIC LINE
FINALIZE STOP PLAY PAUSE REC/REC MUTING
MIC
3 4,5
+10
C O N T R O L
REPEAT CD CDR
FADE SYNCHRO
3
+
PITCH
SET
PITCH–
REMOTE CONTROL
STOP
2 3
or button on the
+