Using The Remote Control To Control Playback; Direct Playback Of A Specific Track - JVC XL-R2010BK Instructions Manual

•
Using the Remote Control to
Control Playback
The buttons on the remote control can be used to control CD player
playback and CDR recording and playback. When using the
remote control, be sure to point it directly at the front lefthand side
of the main unit (facing you) when pressing the buttons.
CD REC CD EDIT FINALIZE
1 2
4 5
7 8
10 +10
PLAY C O N T R O L
MODE REPEAT CD
•
REC FADE
REC MUTING
+
PITCH
SET
PITCH–
RM–SXLR2010A REMOTE CONTROL
1
Press the CD or CDR button to select the
device.
CD button: To control the disc in the CD player
CDR button: To control the disc in the CDR
• When the CD function is selected, the CD indicator is shown in
the display window. When the CDR function is selected, the
CDR indicator is shown.
2
Press the command button of the operation you
want to perform.
• The buttons on the remote control perform the same operations
as the corresponding buttons on the main unit.
• The command is applied to the CD player or CDR depending on
the function currently selected.
12
STANDBY/ON
DISPLAY
3
6
9
CDR
1
SYNCHRO
2
Direct Playback of a Specific
Track
CD playback can be started from a specific track by pressing the
corresponding number button(s) on the remote control.
CD REC CD EDIT
1
2
4
7
+10
10
PLAY
MODE REPEAT
•
REC
REC MUTING
PITCH
SET
PITCH–
RM–SXLR5010A
1
Press the CD and CDR Deck Selection button
corresponding to the tray holding the CD and
track to be played.
For a CD in the CD player
C O N C O N T R O L
CD
For a CD in the CDR
C O N T R O L C O N T R O L
CD
2
Press the number button(s) of the track you
want to play.
The track number corresponding to the buttons pressed is shown in
the information display, and playback of that track starts.
To select tracks 1 through 10
Press the number button (1 through 10) corresponding to the track.
To select tracks 11 or above
First press the +10 button, and then press one of the number but-
tons 1 through 10.
Example: Track 15
Press +10 followed by 5.
Example: Track 20
Press +10 followed by 10.
STANDBY/ON
FINALIZE DISPLAY
2 3
5 6
8 9
1
C O N T R O L
CD CDR
FADE SYNCHRO
+
REMOTE CONTROL
CDR
CDR