Program Edit Recording - JVC XL-R2010BK Instructions Manual

Note
• Up to 32 steps can be included in the programming. The same
track cannot be programmed twice.
When there is not much recording time left on the CD-R or CD-
RW disc, tracks that are longer than the remaining time (pre-cal-
culated) can be programmed but "NO REM" is shown in the
information display.
5
Press the CDR Control PLAY 3 or ¶ REC/REC
MUTING button on the main unit or the 3 (play)
or ¶ REC/REC MUTING button on the remote
control. Recording of the selected songs will
begin.
"START TO DUB?" is shown in the information display
When "ADD FINALIZE?" is shown in the information
window:
• No response (no input) assumes that finalization is to be per-
formed, or you can press the SET button (main unit/remote con-
trol) to confirm that finalization is to be done. Press the
CANCEL button (main unit/remote control) to keep the disc
unfinalized.
Note
• This message will not be shown if the menu FINALIZE func-
tion setting is "OFF". The default setting is "ON".
• When a blank disc is in the CDR tray, "UPDATE OPC" is
shown following "ADD FINALIZE?".
The recording process starts.
• Only the tracks selected from the CDs in the CD player are
recorded.
• Playback starts from the first track seleted. The playing time of
the track and the remaining playing time of the CD-R or CD-
RW disc are shown in the information display.
• As high-speed recording is performed (CD-R 4x, CD-RW 2x),
there is no audio output during the recording process.
When recording at normal speed, follow the procedure for "Setting
the Unit for High-speed Recording" (see page 28) and start record-
ing after setting the speed to normal speed. You can listen to the
source while it is being recorded.
When recording completes
"STOP DUBBING" flashes and recording automatically stops.
When recorded without canceling "ADD FINALIZE?"
"FINALIZE" is shown in the information window after recording is
stopped and finalization is automatically performed.
To stop the recording at any time
Press the CD Control STOP 7, CDR Control STOP 7 or CANCEL
button on the main unit or the 7 (stop) or CANCEL button on the
remote control to stop the recording process. The recording mode
is released after "STOP DUBBING" is shown in the information
display.
Notes
• There is no need to adjust the recording level.
• The last program information (the most recently created pro-
gram still stored in the unit's memory) will be erased if the tray
of the CD player are opened.
26

Program Edit Recording

This type of recording allows you to make a program of your favor-
ite tracks on the CD loaded in the CD player in any order you like.
1
XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER
STANDBY OPEN/CLOSE REC SOURCE
DIGITAL CD
STANDBY/ON
PLAY MODE CD EDIT CD REC
LEVEL PHONES
REC SOURCE
STOP PLAY PAUSE
SELECTOR
MIN MAX
3
CD REC CD EDIT
1
4
7
10
PLAY
MODE REPEAT
•
REC
REC MUTING
6
PITCH
4,5
RM–SXLR2010A
1
Load the CD in the CD player.
2
Load a recordable CD-R or CD-RW disc in the
CDR tray.
• The disc is read.
• The default setting is for the CD to be recorded digitally. If you
press the REC SOURCE SELECTOR button and select CD
ANALOG you can also record the CD using analog sound. You
can listen to the source when recording using analog sound, but
you cannot use high-speed recording.
• When recording SCMS (see page 41) discs, the disc is recorded
using analog sound.
3
Press the CD EDIT button (main unit/remote
control) twice to select the Program Edit mode.
Main Unit
CD EDIT
"PROGRAM EDIT" is shown in the information display for 3 sec-
onds, the P EDIT edit recording indicator is shown in the display
window.
• The unit may be required to read the TOC (Table of Contents)
of the CDs loaded in the CD player. If this is done, "TOC
READING" is shown in the information display.
2 4,5
MULTI JOG/REC LEVEL
OPEN/CLOSE
LINE MIC
– +
SYNCHRO MENU SET CANCEL
LINE CD
MIX BLANCE
MIC LINE
FINALIZE STOP PLAY PAUSE
REC/REC MUTING
MIC
4,5 6 CANCEL
STANDBY/ON
3
FINALIZE DISPLAY
2 3
5 6
8 9
+10
C O N T R O L
CD CDR
FADE SYNCHRO
4,5
+
SET
PITCH–
CANCEL
REMOTE CONTROL
Remote Control
CD EDIT