To Insert A Disc; To Remove A Disc - JVC XR-D400SLE Instructions Manual

To insert a disc

1
Open the loading tray by pressing
0 OPEN/CLOSE.
2
Place the disc into the loading tray.
Make sure the disc edge does not overlap
the edge of the recessed area.
3
Close the loading tray by pressing
0 OPEN/CLOSE.
You can check the track information by
viewing the TRACK indicator.

To remove a disc

Open the loading tray by pressing 0 OPEN/CLOSE.
1
2
Remove the disc from the loading tray.
Close the loading tray by pressing 0 OPEN/CLOSE.
3
NOTES
• Never pull on the loading tray when it is in the open position.
• Always keep the loading tray in the closed position except when inserting or removing a
disc.
• Do not insert a disc to the loading tray for SOURCE. The unit cannot play a disc that is
inserted into the loading tray for SOURCE.
• When you insert an improper disc, the disc is ejected. Make sure that a disc is proper
before inserting.
Playback operations
OPEN/CLOSE
Insert a disc into the loading
tray for REC/PLAY.
English
11