Playing Back A Disc; Turn On The Power; Load A Disc; Start Playback - JVC XL-R910SL Instructions Manual

Playing Back a Disc

This manual mainly explains operations using the buttons and controls on the front panel. You can also use the buttons on the remote
control if they have the similar names (or marks) as those on the front panel.
If operations using the remote control are different from those using the front panel, they are then explained.
1
This unit has been designed to play back the following discs:
• Audio CD (CD)
• CD Recordable (CD-R) — both finalized and unfinalized discs
• CD Rewritable (CD-RW) — both finalized and unfinalized discs
1

Turn On the Power

Press POWER to set it to the _ ON position.
The display illuminates.
POWER
_ ON/ — OFF
If a disc is already loaded, the total track
number and the total playing time appear.
2

Load a Disc

1 Press 0 to open the disc tray.
2 Insert a disc — CD, CD-R or CD-RW.
CORRECT
• When using a CD single (8 cm), place it on the inner circle of
the tray.
7
4 / 1
¢ / ¡
COMPACT DISC RECORDER
PROGRAM SET CLEAR
AUTO
REPEAT
TRACK
POWER
_ ON/ — OFF
RANDOM DISPLAY
REPEAT
DISPLAY
Remote
NOT
INCORRECT
2 3
Disc tray
XL-R910
REC LEVEL
REC
FINALIZE
PAUSE REC
REC DIGITAL
SOURCE ERASE SYNCHRO
MIN
8
3

Start Playback

Press 3.
The disc tray automatically closes ("CLOSE" flashes on the
display), and the unit starts reading the disc information recorded on
the disc ("TOC READ" flashes), then starts playback — Normal
Play.
When you have loaded a CD.
(See also notes below.)
Notes:
• If you have loaded a CD-R, the CD-R indicator lights up. (If the disc
is finalized, the FINALIZE indicator also lights up.)
• If you have loaded a CD-RW, the CD-RW indicator lights up. (If the
disc is finalized, the FINALIZE indicator also lights up.)
To stop playing, press 7.
To eject the disc, press 0.
To turn off the unit, press POWER to set it in the — OFF position
so that the display goes off.
7
MAX