Frequently-used Commands
Table F-1: Frequently-used Server Commands, cont.
Command
DEFINE SERVER NETWARE LOADHOST
server
DEFINE SERVER PRIVILEGED PASSWORD
DEFINE SERVER RARP {EN/DIS}
DEFINE SERVER SOFTWARE "filename"
DEFINE SERVER SUBNET MASK ipmask
HELP option
DEFINE SERVICE "name" PORT num
DEFINE SERVICE
"name" option
Option(s)
<nothing>
<keyword>
APPLETALK {EN/DIS} Toggles whether the named service can be used
LANMAN {EN/DIS}
LAT {EN/DIS}
NETWARE {EN/DIS}
RTEL {EN/DIS}
Description
Specifies the NetWare host from which the EPS
requests its run-time code. Enter a file server
name of up to 11 characters.
Sets a new password that will be required for
privileged user status. You will be prompted for
the new password (up to 6 alphanumeric charac-
ters, case-insensitive).
Enables or disables querying for a RARP host at
system boot time.
Specifies the name or path (TCP) of the soft-
ware download file. The filename can be up to
11 characters, and the pathname can be up to 26.
The EPS will add a ".SYS" extension.
Specifies the subnet mask to be used for the
EPS. The ipmask must be in n.n.n.n format.
Displays a list of top-level (general) Help top-
ics.
Displays information about the keyword(s)
entered. Multiple keywords must be specified in
the order they occur in a command.
Creates a new service and associates it with the
specified port.
to service networks running the specified proto-
col. RTEL applies to TCP/IP networks.
Server Commands
F-3
Need help?
Do you have a question about the EPS1 and is the answer not in the manual?