Lantronix EPS1 Installation Manual page 33

NetWare Configuration
Code Meaning
0xfffffda7 Object could not be
found in the given
context
0xfffffda5 Requested attribute
could not be found
0xfffffd69 DS Database is locked An administrator is probably updating the database. Wait a
0xfffffd63 Invalid password
0xfffffd54 Secure NCP violation Turn down the NCP packet signature level so that it is not
Bit Meaning
1 Server out of memory
2, 3 Unexpected response
from file server
4 No printers found for
the EPS
5 No printer queue found
6 Login failed
7 Authentication failed
8 Server cannot attach to
queue
Table 5-3: NDS Errors from the File Server
Remedy
Check the EPS server name, DScontext, and DStree to ensure
the printer server is set up correctly with PCONSOLE.
Use PCONSOLE to ensure that the EPS has associated print-
ers and the printers have associated queues.
few minutes and issue the Set Protocol NetWare Reset com-
mand.
The password for the print server object under PCONSOLE
must match the EPS login password. If the login password on
the EPS is left as the default (access), there should be no pass-
word for the print server object.
required.
Table 5-4: NDS Printing Errors
Remedy
Turn the EPS off, wait a few seconds, and turn it back on. Disable
unused protocols and/or remove fileservers without print queues
from the NetWare access list.
Report the problem to Lantronix Technical Support.
Ensure that there are printers for the EPS, and the printer names
match the service names on the EPS.
Ensure that the printers have associated queues.
Ensure there is a print server object configured with the same
name as the EPS.
Ensure the EPS login password is the same as the print server
object password. If the EPS is using the default password (access),
there should be no print server object password.
Check the NDS partitions, replicas, and volumes to ensure the file
server where the queue lives has the correct information.
NetWare Host Troubleshooting
5-5